Structural features
Cots surface after conditioning, inner hole processing, do dynamic balance surface fine grinding and engraved with pit type reticulation, evenly coated, less glue consumption.
The surface of the squeezer roller is ground and plated with hard chrome.
The rest of the paper guide roller surface plated with hard chromium.
Pressure roller pneumatic lift, easy to operate.
Manually adjust the clearance of paint scraping.
Apply cots of 215mm, uniform cots of 122mm, pressure roll o...
Structural features
The hood suction structure is adopted with high-pressure strong fan. The air source and electrical control are centralized in the same operation cabinet, and the operation side is fully enclosed and covered.
High quality resin sand casting with wall panel thickness of 200 mm. It adopts independent gearbox and universal joint transmission structure.
The lifting trolley is installed on the transport overpass, which can be used to take out the tile roller assembly and pressur...
Structural features
This part is connected by No.20 channel steel, No.16 I-beam, 63 angle steel, column, etc.
There are safety barriers, ladders (made of No. 8 small channel steel) and high-strength herringbone pedals on both sides to ensure the safety of personnel and convenient operation.
The surface of the paper drawing shaft, tension shaft and paper feeding shaft is ground and plated with hard chromium.
The vacuum adsorption tension control, suction pipe 5 inches, with regulating valve, t...