Welcome to our websites!

LJXCZYKM-B Series (Upper Print Roll to Roller Transfer)

Short Description:

· Host and digital display control system, can store general orders, easy to operate.

· Electronic suspension, automatic reset, quick replacement.

• Each unit is equipped with an emergency stop switch and safe operation control.

· The gap adjustment adopts electric adjustment device, which is more convenient to operate.

· High-strength design of the whole machine, spray-type circulating lubrication system.

· International components such as electrical components, main bearings and start control components.


Product Detail

Product Tags

Main featrues

· Host and digital display control system, can store general orders, easy to operate.

· Electronic suspension, automatic reset, quick replacement.

• Each unit is equipped with an emergency stop switch and safe operation control.

· The gap adjustment adopts electric adjustment device, which is more convenient to operate.

· High-strength design of the whole machine, spray-type circulating lubrication system.

· International components such as electrical components, main bearings and start control components.

H67162aff00814b69bf66455ca83396faN

Technological parameter

Project/Type ZYKM-B1022 ZYKM-B1224 ZYKM-B1228 ZYKM-B1424 ZYKM-B1428 ZYKM-B1624 ZYKM-B1628 ZYKM-B1632
Maximum speed (piece/min) 150 150 140 150 140 120 120 100
Paper feeding precision (mm) ±1.0 ±1.0 ±1.0 ±1.0 ±1.0 ±1.0 ±1.0 ±1.0
Maximum feed size (mm) 1000x2300 120x2500 1200x2900 1400x2500 1400x2900 1600x2500 1600x2900 1600x3300
Minimum feed size (mm) 300x600 350x600 350x600 400x600 400x600 450x600 450x600 450x600
Size of drawing paper (mm) 1300x2100 1500x2500 1500x2900 1700x2500 1700x2900 2000x2500 2000x2900 2000x3300
Maximum printing area (mm) 1000x2200 1200x2400 1200x2800 1400x2400 1400x2800 1600x2400 1600x2800 1600x3200
Printing set (mm) ±0.5 ±0.5 ±0.5 ±0.5 ±0.5 ±0.5 ±0.5 ±0.5
Thickness of standard printing plate (mm) 7.2mm 7.2mm 7.2mm 7.2mm 7.2mm 7.2mm 7.2mm 7.2mm
Minimum slotting interval (mm) Positive knife 160x160 160x160 160x160 160x160 160x160 160x160 160x160 180x180
Scalpel 270x65 270x65 270x65 270x65 270x65 270x65 270x65 290x70
Maximum groove depth (mm) 250 300 300 350 350 400 400 400
Slotting accuracy (mm) ±1.5 ±1.5 ±1.5 ±1.5 ±1.5 ±1.5 ±1.5 ±1.5
Die cutting precision (mm) ±1.0 ±1.0 ±1.0 ±1.0 ±1.0 ±1.0 ±1.0 ±1.0
LJXCZYKM-B Series (Upper Print  Roll to Roller Transfer) (5)

Paper feeding unit

· Roller leading edge paper feeding system, independent electronic shaft, extended paper feeding. Adopting international advanced technology, the system is stable and the paper feeding precision is high.
· The suction fan assists in feeding paper, and the air volume is adjusted by frequency to ensure the smooth feeding of the curved cardboard. Suitable for 3, 5, 7 pressed corrugated board.
· The front bezel is manually adjusted and the dial is displayed for direct convenience.
· The left and right side flaps are individually adjusted and displayed digitally.
· The tailgate is electrically adjusted, which is simple and convenient.
· Double conveyor roller mechanism, the first group of paper feed rollers adopts floating structure, and the pressure can be adjusted by spring force. Manual adjustment of clearance, signage, The adjustment range is 1 to 12 mm.
· A brush at the entrance of the paper feed roller to remove impurities from the cardboard surface. A dust mechanism is installed between the two sets of paper feed rollers for sucking away impurities on the surface of the cardboard.

To improve the quality of printing.

LJXCZYKM-B Series (Upper Print  Roll to Roller Transfer) (2)

Printing unit

· Printing roller: steel cylinder, surface grinding, hard chrome plating. Diligent balance correction, the link is stable.
· The axial adjustment is manually adjusted, and the axial adjustment range is 10mm.
· Ratchet fixed roll shaft. The full version of the grooved loading and unloading printing plate, the foot switch electric control is reversed.
· The gap of the presser roller is manually adjusted, and the label is displayed. The adjustment range is 4~12mm.
· Rubber roller printing system. The surface of the steel pipe is covered with wear-resistant rubber, and the medium and high special grinding. The gap is electrically adjusted, digital display, and the adjustment range is 0 to 6 mm. (selected With: scraper ink system)
· Grinding anilox rolls: with a separate motor-driven idler to ensure ink is not known during shutdown. Network cable: 160 to 500 optional. (Optional: Ceramic Anilox roller)
· The paper feed ring can be quickly moved and locked. (Optional: Full vacuum Fu-delivery system)

LJXCZYKM-B Series (Upper Print  Roll to Roller Transfer) (3)

Slotting unit

· Pre-pressure wheel device: electric linkage type slotting, pressing line and pre-pressing are completed once.
· Electric adjustment of the length, width, height and folding of the carton, digital display.
· The pressure of the pressure roller is manually adjusted, and the dial displays the adjustment value.
· Slotting knife thickness 7mm, alloy steel material, zigzag heat treatment toothed grinding, sharp edge, high precision.
· The slotted phase is adjusted by computer electric numerical 360 degree.
· Add a hand hole holder.
· Install a chain control switch in the slotted section to achieve emergency stop, stop or resume paper feed.

LJXCZYKM-B Series (Upper Print  Roll to Roller Transfer) (4)

Die cutting unit

· Manually adjust the die cutting pressure gap.
· The pad roller automatically traverses the swimming device.
· Imported quick-change rubber pad and wear resistance.
· Speed ​​difference compensation system ensures line speed consistency and guarantees accuracy.
· Pad grinding mechanism to extend the life of the pad and reduce consumption.


  • Previous:
  • Next:

  • Write your message here and send it to us