Welcome to our websites!

Products

  • carton making machine carton printing cardboard razor slicing edge slitter paperboard slitting thin blade slitter scorer machine

    carton making machine carton printing cardboard razor slicing edge slitter paperboard slitting thin blade slitter scorer machine

    Man-machine interface – PLC control, the system for the robot operating system more humanized, simple structure, easy to maintain. 1. Manual or automatic paper feeding table can be configured 2. Automatic and independent adjustment of prepressing wheel, paper knife holder and line pressing wheel 3. Equipped with manual/automatic knife sharpening 4. Automatic adjustment of cardboard height and pressure 5. Point and fine-tune 6. Automatic counting 7. Paper parting and line pressing accura...
  • Flat bed die cut machine semi automatic platform paper die cutting machine

    Flat bed die cut machine semi automatic platform paper die cutting machine

    Taiwan die cutting machine is a new generation of production of carton equipment, especially high-grade special-shaped cartons.
    Table die cutting machine will edge cutting, Angle cutting, punching, slotting, wrinkling and other processes together, so that corrugated paper into the shape of the board.
    The utility model is stable and reliable, reflected in the cardboard specification is accurate, no burrs, neat and tidy, safe and convenient operation and so on.

  • LJXCZYKM-A Series (Upper Print  Roll to Roller Transfer)

    LJXCZYKM-A Series (Upper Print Roll to Roller Transfer)

    · Host and digital display control system, which can store general orders and is easy to operate.

    · Electronic suspension, automatic reset, quick replacement.

    • Each unit is equipped with an emergency stop switch and safe operation control.

    · The gap adjustment adopts manual adjustment device, which is more convenient to operate.

    · High-strength design of the whole machine, spray-type circulating lubrication system.

    · International components such as electrical components, main bearings and start control components.

  • SF-320C fingerless type single facer

    SF-320C fingerless type single facer

    The hood suction structure is adopted with high-pressure strong fan. The air source and electrical control are centralized in the same operation cabinet, and the operation side is fully enclosed and covered.

  • GSYK1224 high speed water – based printing plate – free die-cutting machine

    GSYK1224 high speed water – based printing plate – free die-cutting machine

    ●PLC touch screen control, including automatic counting, speed, quantity display, interval, alarm lamp function.

    ● Selection of high quality materials and accessories. Drive roller adopts high quality steel, static and static balance, grinding and polishing, hard chrome plating.

    ● The main drive bearing adopts Harbin high quality bearing.

    ● The main control electrical appliances adopt domestic famous brand Chint.

    ● Keyless connection ring, reduce center wear, maintain long-term printing overprint accuracy.

    ● Control system: full computer PLC control system, each group using touch screen computer operation.

  • Hcl-1244 high speed ink printing die-cutting machine

    Hcl-1244 high speed ink printing die-cutting machine

    ● Designed in accordance with The European concept, functional, security more reliable.
    ●PLC touch screen control, including automatic counting, speed, quantity display, interval, alarm lamp function.
    ● High quality materials and accessories are selected. All drive rollers are made of high quality steel, balanced by static and static, and polished by grinding and plating hard chrome.
    ● the main transmission gear adopts high frequency quenching treatment of high quality alloy steel with 40 chromium, high precision gear grinding, high precision, strong wear resistance, smooth and reliable transmission, rockwell hardness >60 degrees.
    ● The main drive bearing is Harbin high quality bearing.
    ● The main control electrical appliances with domestic famous brand Zhengtai.
    ● Keyless connection ring is applied to reduce center wear and keep long-term printing overprint accuracy.
    ● Automatic zero and automatic reset.
    ● Host start protection, host can not start actively without locking, to prevent misoperation.
    ● All units of the machine are automatically or independently separated, electrically operated and pneumatically locked, and the alarm bell continuously rings during walking to ensure the safety of operators. Automatic braking to ensure position cannot be moved.
    ● Emergency stop protection, emergency stop switch is set in the machine, which can quickly stop the unit movement inside, ensuring more protection.
    ● Control system: the whole computer PLC control system, each group using  touch computer screen operation.

  • Cassette Single Facer SF-360E(320E)

    Cassette Single Facer SF-360E(320E)

    The negative pressure design with low heat loss makes the core paper uniformly pressed and attached to the surface of the corrugating roller, so that the corrugated can be better formed. Because the pressure is uniform, the top of the corrugated can be better coated with glue, so that the single-sided corrugated paper can fit better.

  • TQ conveyor bridge

    TQ conveyor bridge

    There are safety barriers, ladders (made of No. 8 small channel steel) and high-strength herringbone pedals on both sides to ensure the safety of personnel and convenient operation.

  • Hcl-1300a /1600A front gauge automatic paper mounting machine

    Hcl-1300a /1600A front gauge automatic paper mounting machine

    Automatic tracking technology, according to the size of the paper automatically adjust the relevant parameters, so that the machine always operate in a good state; 

    Unique pre-positioning system, accurate positioning, the base paper is not ahead; The lead amount of face paper is adjustable; 

    Equipped with high precision high-speed feida paper feeding device, enhanced paper feeding device, smooth paper feeding.

  • LJXCZYKM-B Series (Upper Print  Roll to Roller Transfer)

    LJXCZYKM-B Series (Upper Print Roll to Roller Transfer)

    · Host and digital display control system, can store general orders, easy to operate.

    · Electronic suspension, automatic reset, quick replacement.

    • Each unit is equipped with an emergency stop switch and safe operation control.

    · The gap adjustment adopts electric adjustment device, which is more convenient to operate.

    · High-strength design of the whole machine, spray-type circulating lubrication system.

    · International components such as electrical components, main bearings and start control components.

  • Upper Print  Roll to Roller Transfer

    Upper Print Roll to Roller Transfer

    · Host and digital display control system, can store general orders, easy to operate.

    · Electronic suspension, automatic reset, quick replacement.

    • Each unit is equipped with an emergency stop switch and safe operation control.

    · The gap adjustment adopts electric adjustment device, which is more convenient to operate.

    · High-strength design of the whole machine, spray-type circulating lubrication system.

    · International components such as electrical components, main bearings and start control components.

  • LJXCRG Series (Full-process Adsorption, Mobile)

    LJXCRG Series (Full-process Adsorption, Mobile)

    · The whole machine is designed and manufactured according to high requirements, reliability and safety.

    · Select high-quality materials and accessories. All driving roller materials are made of high-quality steel, hard chrome plated and ground.

    · Each unit fixed unit adopts vacuum adsorption conveying device, and the printing unit adopts servo control coloring to realize high-precision precision printing.

    · The whole machine adopts touch screen PLC control, which can store and recall the created order data. Changing orders is faster and easier to operate.

    · Remote detection of faults over the network to quickly eliminate equipment failures.

    · Automatic zero reset, automatic reset.

    • Adjust the gap between the conveyor roller, embossing roller and anilox roller by computer control.

    · Paper dust central collection system.

12345 Next > >> Page 1 / 5